HOME - Back to board
 

conion 126 help please

sinister - 2008-05-04 15:29

there is a loose wire and im not sure where it goes. help me!!!!

jimski - 2008-05-04 16:35

Is that the anttena wire,that hooks to the back of the radio?

sinister - 2008-05-04 16:58

no its part of the bottom deck.

jimski - 2008-05-04 17:31

Show a picture where it is coming from

sinister - 2008-05-04 19:23

quote:
Originally posted by jimski:
Show a picture where it is coming from


jimski - 2008-05-05 02:53

This might be going to the decks leaf switch?,It has been a while since i had mine, the picture still dosnt make me remember thou.Maybe blaster can pop his open if he hasnt sold it yet,or someone around the site.Right now without a schematic or a box similar, look around the box real close and see where it could have been soldered to you will maybe see a rough solder spot around.

sinister - 2008-05-05 10:05

i was thinking around the motor area but im not 100% on that. so if anyone has one plz help me.

jimski - 2008-05-05 13:48

I have a hunch it goes somewhere under that board ,to check ur gonna have to remove that board or raise it up to see.Look under there for a rought solder spot where it could have went.

jayridge - 2008-06-21 21:58

http://i29.tinypic.com/2lar98j.jpg

it goes to the first switch (see pic)

sinister - 2008-06-21 22:28

welcome jay. thanx ill have a look and see what i can do. thanx again. Nod Yes

jayridge - 2008-06-21 23:12

no problem glad to help mine was having jamming problems so i had it fully striped when i took the pic Nod Yes

appleknocker - 2008-06-23 12:53

welcome jay_ridge! And thanks for helping out our good man Sinister!

sinister - 2008-06-23 13:00

quote:
Originally posted by appleknocker:
welcome jay_ridge! And thanks for helping out our good man Sinister!


Cool

jimski - 2008-06-23 13:20

I knew it went to that leaf switch, glad u got it going