Hi all,
Wondering if someone could help me in finding replacement belt(s) for a Sanyo M9994. Only peaked inside and from I could tell there are 2 belts. The motor/drive belt was all chewed up, so I would be unable to measure this for replacement reference. Does anyone have the measurements available for this belt or could possibly have a source where I might buy this belt?

When I type it into Google I get these 2 results 7" x .039" thick & 10" square.

Any help would be much appreciated.
Milo.

The 9994 has 4 belts total: 3 for the mechanism and 1 for the tape counter. The main one is usually not visible as it's under the flywheel. This is the small (circumfrence) but thick belt that does frequently slip.

The belts you'll need are:

Square Belt Large 5.4" (or try 5.3" or 5.1")
Square Belt Orbicular 7.0"
Square Belt Orbicular 10.5"
Square Belt Transitional 10.0"

Do a search on internet for these sizes and you should not have a problem finding a suplier.

Also, another area to check is the felt clutch. It frequently is an area that requires attention on this model.

Good luck,
Norm.

Norm, thank your for this!
I've been listening to this box and I've grown fond of the sound. It really does kick for a mid size box. And would love to get the tape running soon.
Thanks again!
Milo

Stormin normin thats some very cool and fat help! What makes this sport, hobby obsession fun.