Hi there , I have just bought a Sharp GF7500 from Ebay.Everything works fine except for the tape deck and I am wondering if the this might be an easy fix if it`s just the belt  or will it be more complicated.If I can get this fixed it will be quite a nice little unit .I only paid £24 for it ,is this a good buy .Any help please.

hi bob.just a belt change should fix it..the GF7500 has nice sound,and its very loud for a small box

Thanks for that .I`m in England so could you tell me where I might get a spare belt from please.Not too sure where to start looking .

not sure about uk mate,i am also in uk.all i can tell you is,there is a guy is in germany,he sells belt kits for lots of different ghetto blasters,i think he ships worldwide...this is belt kit for your box..

http://cgi.ebay.de/Sharp-GF-7500-H-Riemen-Set-rubber-belts-Radiorecorder-/160539510115?pt=Radios_Recorder&hash=item2560e68563

UK link, they have all of three belts you need.

http://www.4sharp.co.uk/cgi-bi...amp;model=&part=

You need

NBLTH0088AF00  Flywheel drive belt

NBLTK0208AFZZ  Playback belt

NBLTK0228AF00   FF/Rewind belt

GF-7500 shares the same tape mechanism with GF-500, GF-700, GF-9500

so this scheme for GF-500 should help you

Thanks lads for that help, much appreciated.The stereo should arrive in couple of days so I will let you know what the state of play is when I plug it in.Lets hope it can be sorted out and theres nothing major wrong .

Greetings! Position of a regulator Loudness, influences level of a linear exit. Unless that is normal? On the scheme it so. That, at connection of the amplifier of capacity to Sharp GF-7500, level of a target sound is regulated by the handle Loudness. So shouldn't be.