Hello I have a lot of dust on the membrane boombox but those problems are behind the gate, and I do not know how to disassemble, someone among you will have already done it? Any ideas?
Thank you

Anyone ?!

I think it's just a matter of carefully screwing the screws out and just simply cleaning the dust out the box mostly.

In fact as the speaker is white dust (or dirt really shows a lot) I would like to know if anyone has managed to remove the grids without any broken

the grills covering the speakers can only be removed from the inside-

then there are 4 tiny screws in each corner -

and 4 metal tabs ( each ) that need to be bent -

there is plenty of glue holding the tabs in place -

so you may need a knife to free the tabs

can't you just use compressed air to get the rubbish out? Sometimes it works!

  and at 120 psi 

Originally Posted by Michiel:

can't you just use compressed air to get the rubbish out? Sometimes it works!

  and at 120 psi 

Lol, I'm metric.... 8 to 10 bar would be sufficient  But take care not to blow the plastic body to pieces...

Ok I'll try, I think a draw (but it does not work), but not to blow

I just took one apart for repair a few weeks ago. Be very careful with those grills the folded tabs break easy. Broke one removing the grills.

Just to see him like that, it scares me