HOME - Back to board
 

Sharp 9191 Battery Cover Wanted

jt.techno - 2013-09-13 13:14

Hi,
I just aquired a Sharp 9191 but without a battery cover.
Does anybody have one on offer?
Thanks, JT.

northerner - 2013-09-13 13:18

Congrats on a great box. Got no spare cover tho. Good luck on finding one

jt.techno - 2013-09-13 15:16

Thanks - it needs a good clean up and a cassette deck service/belts to get it working again but should be a good project to keep me occupied :-) ...just missing a battery cover

northerner - 2013-09-14 05:46

Lovely box to work on. You'll need to check the little tyre on the capstan that always turns to goo, have a look at this thread I did

http://REPLACEMENT ERROR/topic...chneils-sharp-gf9191

jt.techno - 2013-09-14 06:11

Thanks for the thread link - a fund of information - can't wait to get started.  By the way, what is the record bar you mention - does this need cleaning with switch cleaner/lube?  Also wonder where best to get belts from for this box?

northerner - 2013-09-14 06:21

Record bar is behind the deck and it needs switch cleaner...the audio goes thro this so its important to clean it properly. Belts I get from Malvern Audio on eBay, just get a selection pack of square ones and flat ones

schneil - 2013-09-19 09:16

I might be getting hold of a "parts box" 9191.  If it comes with a battery cover would you be interested?

jt.techno - 2013-09-22 13:11

Yes indeed - that would be much appreciated - let me know if you get one - thanks in advance :-)

northerner - 2013-09-22 23:50

Sorry JT...as you can see on the other thread there was no demand for parts so the whole box is coming to me to rebuild (its a bit bust up!) and mod. I'll need the battery door in situ...sorry

jt.techno - 2013-09-23 01:31

Oh well, not to worry - post some pics of the before/after when completed ... but if anybody out there has a spare Sharp 9191 battery compartment cover then I'm still looking and interested :-)

schneil - 2013-09-23 05:48

Hi JT

 

Yeah the box was beat up, but still sounds really good.  It was a  shame to scrap it.  So myself and Si agreed to rescue it and give it a good home

jt.techno - 2014-05-16 05:13

Hi all - if there is anybody out there that has a spare battery cover for a GF-9191 that they would like to post to me, I am still looking :-)

Hi Si - you don't happen to have one off that monster you just created? ...and I mean monster in the awesomeness manner of course :-)

deliverance - 2014-05-16 05:16

 I have one somewhere i will have a look later .

autoreverser - 2014-05-16 05:42

...and if you find two i'll also have one 

jt.techno - 2014-05-16 06:57

thanks d