This might make a half decent tape copy:


...for a couple of portables

like the pick paul, is that the one and only dd9? my m90's havnt got line in only din.

The very same DD9, Tim.

No line in on an M90, are you sure?

mine have line in paul but not the standard ones mine are din in instead and sadly i havnt got the lead

weird. Got a pic of the back panel?

Does the walkman work again?

Here you go paul lad.

New camera Tim?

Actually Tim, you need one of these...

http://cgi.ebay.co.uk/5-pin-din-plug-to-3-5mm-mono-jack...QQrdZ1QQcmdZViewItem

quote:

Originally posted by agentorange:
New camera Tim?

indeed chris not bad eather for a cheap SLR

quote:

Originally posted by rimmer36:
Here you go paul lad...

Weird.
I've never seen that, or even heard of the LB version of the M90. I know the JW (which I have - it came from the US) & the C (which people bang on about having 70W written on the back, not 61W - like it makes a difference ).

quote:

Originally posted by agentorange:
Actually Tim, you need one of these...

Tell me I'm a picky b4stard, but wouldn't one of these be better, as it's stereo?
http://cgi.ebay.co.uk/3-5mm-Stereo-Jack-Plug-5-Pin-Din-...116850QQcmdZViewItem
..if it's wired up correctly, of course. Others with more knowledge of the mysteries of the 5 pin DIN will be able to help here.

Here is the pinout of the 5 way conector.

http://www.technick.net/public/code/cp_dpage.php?aiocp_dp=pinconhav_din_audio


Using "at the peripheral" figure, that's you see in your M90 ...

Channel L IN : 1
Channel R IN : 4
Channel L Out: 3
Cahnnel R Out: 5

For all, ground is (2).

The easiest way is while you are builting the cable, touch each pin, while monitor trough aux.
Touching Lin pin most shield hum noise in L channel. Touching Rin most shield hum noise in the R channel. Is the faster way to find them.

Becarefull with volume at the walkman.
You need to adjust the volume in the walkman in order to feel the behavior of the volume control of your M90 like any other souce (for example radio). I mean that adjust walk volume in order to match the output level you get trough aux with the output level you get selecting turner in the M90 without touching the M90 volume while you make this compare.

Pedro.