1 changing the belts

Take the back off

disconnect the main 3 pin power plug

disconnect 1 antanna plug. one 3 pin plug to tuner board

take the 4 screws out holding the board on the back of the deck

disconnect the (think its 8 pin(plugs) one on each side of the board ajoined to the back of the deck...

lift board carfully out of the way....wires are still connected under the board if i remember right..but dont tuch them

remove the metal plate under the circuit board by removing the 3 or 4 screws

carfully lift the circuit board and the metal plate out of the way

you will see the main flywheel..small belt going from the flywheel to another small weel...this is the small square belt...

main flywheel belt goes from the flywheel to the motor....should take no more than 20 min to complete the whole process...when done reverse the process and put the back on...your done'''''''''''''''''''''''''''''''''''''''''''''

 2 How to recap an m90

get a soldering iron....take aprox 140 caps out replace them with the new ones.....balls if im doing that lol

3 How to buy an m90...Pay more than anybody else lol

4 how to dispose of an m90.....give to ned209 who will smash it up with his baseballbat set fire to it....and boot it with his foot...god those days were funny

alternative ending

Send you broken ol beat up m90 to redbenjoe....he lives in good ol florida usa....and he knows all the hot chicks like madonna....seriously

get him to get her to place her cat on your m90 lol

then your broken old m90 will be woth millions......half of your funds must go to the good ol redbenjpe federation trust fund though....but you will still be stinking rich of you're ol broken m90

hope you have enjoyed my 5 minuite rant good m90 hunting

m90 service manual here

http://REPLACEMENT ERROR/fileS...Service_Manual_1.pdf

get you're m90 belts here

http://www.elektro-ersatzteile.eu/en/home/

pretty good radio raheem, sounds like you had become an expert on the m90s lol,

proud of you man, we should keep this thread up as guide to belt the m90.

couldnt have done it without you sir.....that may be a great idea driptip...good call.....read the now edited version bro

bump as  some may need to read this

Thanks RahRah I'll bear this is mind for when I get my M90

And now back to reality

All good advice Reno! 

P.S. Does redbenjoe really know Madona?