Chasing the Sony CX20084 speed chip for D6C walkman

Discussion in 'Tech talk' started by rcpilot23, Jan 17, 2022.

  1. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    Be careful, There are fakes out there, make sure you have a return policy.
     
    Rune Lindman likes this.
  2. Silverera

    Silverera Active Member

    Messages:
    460
    Trophy Points:
    43
    Location:
    MEL
    Not sure if I posted on an earlier thread but
    my techie friend made a test rig patched into a junk DDII bought for parts. We used the CX20084 from that to repair a D6C but the test rig is very useful to test IC's that claim to be compatible with the CX20084. My strip of 6 referred to earlier work so there were some around several years ago that are compatible with the genuine ones.
    Otherwise your best option is to buy a junk DDII as a donor but these are rare too.
    It's another reason I prefer the D6 to the D6C. Sure you've got hybrid modules that can and do fail causing the speed to accelerate but at least these modules can be disassembled and a dud transistor replaced on them. Can't do that with the CX20084 dedicated IC unfortunately.
     
  3. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    Assuming the chip being tested won't damage the tester DDII.
     
  4. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
  5. Silverera

    Silverera Active Member

    Messages:
    460
    Trophy Points:
    43
    Location:
    MEL
    Well not sure I'd be throwing a $100 into the wind to find out but I doubt they're genuine. It's not like they're generics used in many different PCB's to justify getting a replacement scoped, manufactured and released to a potentially large market. If you could return it if it failed in an external test rig then may be worth checking out.
     
  6. Silverera

    Silverera Active Member

    Messages:
    460
    Trophy Points:
    43
    Location:
    MEL
    Update. Check the feedback on the Polida listing of the CX20084 and a few complaints about other chips being fake. One buyer was offered $2 back when putting up negative feedback.
    Buyer Beware!
     
  7. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    Would you be interested in making these and selling them to the members?
     
    Last edited: Oct 27, 2026
  8. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    I used your Gerber zip folder and dropped it into PCBway and it looks like I can make the first order for $34, I just need someone to check if I entered all the parameters correctly, It looks too good to be true but I'm pretty sure I'm missing something:


    Screenshot 2026-10-27 024328.png



    Screenshot 2026-10-27 024410.png



    Screenshot 2026-10-27 024446.png
     
  9. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    Please advise, PCBWay came back with out of stock notice, can anyone look at the attached picture and tell me what is the best replacement? Still waiting on LeKos input as he is the designer of the PCB.

     
  10. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    It looks like the upload function is broken again on this forum, I will upload one when it's fixed.
     
  11. LeKos

    LeKos Member

    Messages:
    11
    Trophy Points:
    13
    Location:
    Russia, Moscow
    Hello! No, I am sorry, but I am not interested in selling this board. I have not tested it on several D6C units and therefore I cannot guarantee 100% operability. The board has only been tested on my machine, which has a first revision main board and motor. As you know, Sony has since installed other motors, which may require changes to some parts.

    If anyone here wants to try these boards on different D6Cs and start manufacturing and selling them, I will not object.

    In the PCBWay screenshots, everything looks correct. If you order the board assembled, it may not have a BA6301 IC. However, all other components should be easily available.
    Additionally, I designed this board for hand soldering. It has 0603 SMD components, which technicians can easily solder using a soldering iron.
     
  12. LeKos

    LeKos Member

    Messages:
    11
    Trophy Points:
    13
    Location:
    Russia, Moscow
    I'm currently working on a new version that is based on the STM32L432KBU6. I designed it as a direct replacement, so there is no need to change any components on the main board. Instead, you simply need to desolder the original IC and install the new sub-board.
    I have a working prototype that I am currently testing in a WM-DD2 Walkman. However, I can't upload any photos at the moment because something in uploader seems to be broken.
    Later I will expalin this new project in details, also with publishing gerber-files, assebly and tuning instructions and firmware.
     
    -LV- and Valentin like this.
  13. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    That's some good news, I will wait for this project then, I will be among the first few to give it a try and give you feedback, I will cancel my request for now with PCBWay and once your board is ready I will order it and I'll try to solder it myself, I had soldered SMD components before with no issues.
     

Share This Page