3D printed parts for some Sony Walkmans for sale (TPS-L2, WM-3, WM-2/DD/DD2/3/10/30/33/100/DC2/D3)

Discussion in 'Stereo2Go classifieds (not auctions)' started by bugpat, Mar 7, 2023.

  1. bugpat

    bugpat New Member

    Messages:
    27
    Trophy Points:
    3
    Location:
    FRANCE - South east : Luberon
    Hi all,

    Just before the second lockdown here in France (nov 2020), my GF offered me a 3d printer, and I started to make some little parts I needed for some of my walkmans. later I offered these on ebay, where some of you bought some (Antictronik on eBay).

    I would now like to sell these parts here, and of course cheaper than on the Bay, for members who need them. Of course If that cause a problem, moderators you can erase this post.



    For Sony TPS-L2 / WM3 :​


    Battery door latch


    Colour by default is blue for TPS-L2. Tell me if you want another color : Black for WM-3 / TCM-600B or Silver for TCM/600

    Price is 5€+ tracked shipping everywhere in the world 4,90€ (for 1 to 4 exemplary - Max weight 20grs). This is now the V2.0 (2025/01), better looking and stronger than V1.0 !

    [​IMG]




    Backplate


    Available in blue by default, or in black on demand.

    Price is 7€ + tracked shipping everywhere in the world 4,90€ (for 1 or 2 exemplary - Max weight 20grs).

    [​IMG]




    Pair of volume sliders


    Left and right volume sliders.

    Price is 7€ + tracked shipping everywhere in the world 4,90€ (for 1 or 2 pairs - Max weight 20grs).

    [​IMG]






    For Sony WM-2, WM-DD, WM-DD2/3/10/30/33/100, WM-DC2 and WM-D3 :​


    Battery cover


    Default color is black. Available in silver on demand. Price is 9€ + tracked shipping everywhere in the world 4,90€ (for 1 exemplary - Max weight 20grs).

    [​IMG]



    All payments by Paypal between friends.

    Just drop me a private message, or post a message on this topic...



    Tracked shipping to France will be cheaper : 2,50 € instead of 4,90€.
     
    Last edited: Jan 23, 2025
    Mister X and On The Beach like this.
  2. radiorich

    radiorich Active Member

    Messages:
    286
    Trophy Points:
    43
    Location:
    Washington state
    Really nice I love using 3d printers and I like using Fusion 360 I have a 3D printer at work in my classroom Flash Forge .
    Sincerely Rich
     
  3. Helabaa

    Helabaa New Member

    Messages:
    26
    Trophy Points:
    3
    Location:
    Belgium
    Hi
    Looking for battery cover for D6C
    Possible to make?
     
  4. Steve Grant

    Steve Grant Active Member

    Messages:
    271
    Trophy Points:
    43
    Location:
    Vancouver British Columbia
    Probably you could provide a lot of the 3 types of tiny buttons and battery covers for Aiwa HS-J* walkman. Almost none of them have all the buttons.
     
  5. bugpat

    bugpat New Member

    Messages:
    27
    Trophy Points:
    3
    Location:
    FRANCE - South east : Luberon
    Hi,
    I will look at my D6C, and let you know if I'll do it
     
  6. Helabaa

    Helabaa New Member

    Messages:
    26
    Trophy Points:
    3
    Location:
    Belgium
    Super !! Looking forward!
     
  7. radiorich

    radiorich Active Member

    Messages:
    286
    Trophy Points:
    43
    Location:
    Washington state
    hello bugPat those look great !

    Sincerely Richard
     
  8. bugpat

    bugpat New Member

    Messages:
    27
    Trophy Points:
    3
    Location:
    FRANCE - South east : Luberon
    Hi all,
    I just made a new and better version of my battery door latch, so I updated the first page...

    [​IMG]
     
  9. radiorich

    radiorich Active Member

    Messages:
    286
    Trophy Points:
    43
    Location:
    Washington state
    Hello bugpat,
    Very interesting !! nice job on the 3d design and print !
     
  10. radiorich

    radiorich Active Member

    Messages:
    286
    Trophy Points:
    43
    Location:
    Washington state
    BugPat ,
    What 3d printer do you use I am going to order my self a Prusa core one !
    I like using both tinkercad and fusion 360 ,
    Sincerely Richard
    P.S. at my work I have been using flashforge brand 3d printers for the last 8 years !
     
  11. bugpat

    bugpat New Member

    Messages:
    27
    Trophy Points:
    3
    Location:
    FRANCE - South east : Luberon
    Hi radiorich,
    I own a Creality Ender 3V2, and made a lot of mods through the years : Auto bed levelling, enclosure (better for ABS printings), direct drive with the original head (instead of bowden), and my last big mod is a new direct drive head (Sprite)...
    And I too use Tinkercad and Fusion !
     
    radiorich likes this.
  12. radiorich

    radiorich Active Member

    Messages:
    286
    Trophy Points:
    43
    Location:
    Washington state
    Hello Bug,
    That is really cool !
    Sincerely Richard
     
    Black Fingers likes this.
  13. andyking93

    andyking93 New Member

    Messages:
    13
    Trophy Points:
    3
    Location:
    San Francisco, CA
    Any chance you could print the whole door for a walkman DD/DC2/WMII? The latch tooth is broken on mine (not the slide latch piece but the actual part it bites onto in the door lip) and so my DC2 won't stay closed. I was planning to buy a clear door replacement for a WM-2 on eBay but would prefer to have more control over what materials are used, what color it is, etc.

    Edit: turns out the WM-2 door does not fit the DC-2 despite looking similar. So I need an exact DC-2 door.
     
    Last edited: Apr 1, 2026
    radiorich likes this.
  14. Black Fingers

    Black Fingers Active Member

    Messages:
    211
    Trophy Points:
    43
    Location:
    Netherlands
    Looking for some one who can print me the lever lock for a DD11/DD22, have a DD22 which is missing it totally....i have another DD22 and even DD11 as an example part for measurements.
     
    ShadyDez likes this.
  15. scottsasonic

    scottsasonic Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    Ontario Canada
    Do you make small cogs as well or is this too intricate for such a process. I need replacement cogs for JJ-P4x series which are across the board the same.
    They are maybe 1cm cross and very tiny teeth - so this might not be able?
     
    Mister X likes this.
  16. Mister X

    Mister X Moderator Staff Member

    Messages:
    20,323
    Trophy Points:
    113
    Location:
    Minnesota
    The printers are getting pretty nice, the Bambu can get down to .2mm so intricate gears are now possible. There's a plethora of filiments now available including plastics like nylon carbon fiber that are much stronger than what was available a few years ago. I haven't done much CAD in the last 30 years but I watch those guys punch out a gear in no time on YouTube, hopefully I can get some time to relearn the process. I see a lot of makers using their phone to take a photo that gets "scanned" by an app making the process 1000x easier.
     
    radiorich likes this.
  17. scottsasonic

    scottsasonic Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    Ontario Canada
    Mister X - that's where I hoped 3D printing would excel. I know CAD and other software to design / mock up - implement - so I might see what a mid range printer can do for me - i would have to get the dimensions of this part to share as well so inspired parties could take a crack .
    The phone scanner seems nice, I wonder if it's accurate enough for smaller items
     
    radiorich likes this.
  18. ShadyDez

    ShadyDez New Member

    Messages:
    2
    Trophy Points:
    3
    Location:
    France
    Hi Black Fingers,
    I came across your post about the missing lever lock for the Sony WM-DD11 / WM-DD22.
    I'm researching the feasibility of producing hard-to-find replacement parts for vintage equipment.
    Did you eventually find a replacement for this specific lever?
    If not, could you tell me whether the original part is plastic or metal, and whether you still have access to an intact one for reference?
    I'd also be interested to know if this seems to be a recurring issue among other owners.
    I'm at the research stage, so I'm not offering a finished replacement yet.
    Thanks for your help!
     
    radiorich likes this.

Share This Page