Deb64

Hello Deb64, I am currently preparing to disassemble my WM-D6 to try to solve a fast running on playback problem. When I tried my WM-D6 powered with a correct Sony 6volt power supply it worked OK first time. Second time it was running fast on playback but no other symptom. I am wondering if the complete CP602 is available anywhere. MikeC

Hi Deb,
I have a walkman WM-DD, bought new in 1982. It's well used, well loved and I still use it daily. The center gear and pinch roller have been replaced with parts from Marian. It plays well except for stopping while playing, or sometimes playing very fast like a chipmunk. Would you be able to look at this for me?

Hi, I have a WM-DC2 that I've had since new and would like to get it back to how it worked in the 80s. It clicks but everything else seems ok but would like an expert to do everything required for a good refurb. It is in minty condition cosmetically. Many photos in my introduction post.

Would you be interested in doing the refurbishment for me? I'm Bristol based.

Hi - I'm wondering about the cost for a refurb of a WM-D6 (ie not the C version)?

Yeah, I was hoping that it would be a simple belt, roller etc job that I was putting off - however, whilst it had been playing correctly using an official Sony AC-15A Adaptor, in the middle of digitising a tape then it started speeding up; where it's now playing ludicrously fast - so I'm assuming that it's a CP602 fault. :(

Thanks.

Hi Deb, I just inherited a WM-D6C from my brother-in-law who passed away. He was the original owner. The device is in perfect shape but does not rewind or fast forward. Would love to send to you for service to keep the device functional for another generation. Thanks so much

Hi. Need help on fast playing d6. It was working well a few days ago but has now sped up. Happy to send by post

If I had a WM-D6C that I needed repaired Deb64 is who I would send it to in the UK. I have many here but they are repairs I need to get to - I am in Chicago but now looking for more work. Leonardo is in Italy. Some of the Walkman Technician I knew at Sony are already gone. Sony when I was there in Niles threw all the new parts away- they probably did it all over before closing down.

I've seen people recommend you several times and was wondering if you could offer me any advice with my Sony WM-FX43...I changed the belt (to the one specifically recommended), cleaned the pinch rollers and capstans, and tried messing with the trimpot that controls motor speed, but all of my tapes still sound like Alvin and the Chipmunks. Any advice? I'd be willing to solder and I do own a multimeter. THANKS!

Hello,

Would you be able to repair my WM-D6C? The belt has already been replaced, but there are a few other issues with the device. Here is a list

- Auto stop activates once or twice before a tape can be played properly
- Fast forward and rewind are not working
- One of the wires on the circuit board has come undone and needs to be resoldered.

Thanks.

Hello Deb,

Are you still available to repair the Sony WM-D6C? If so, I'd like a quote. Serial number: 27363.

Issues:
- Motor spins fast when PSU is connected; could the CX20084 chip be faulty?
- FF/RW work, but no sound from headphone/line-out jacks during play.
- Belts and rubber parts need replacing.
- If possible, I'd like a full refurbish.

Thanks for your time, looking forward to hearing from you!

Hi Deb!
Every forum on the internet points to you as being the authority on repairing a WM-D6C. I was wondering if you were still available?

The issue seems to be the little black rubber ring doesn't make proper contact when Play is engaged, so the tape gets chewed up. I'm worried I've made it worse in trying to correct it myself.

I'm also based in the U.K.

Cheers,
Patrick

hello, I have a wm d6c that i reversed polarity on :( now it smoked. it plays then stops and doesnt ff or rw as it immediately stops and seems very weak too now. any chance of a repair i am in the USA?

I have a WM 6DC that plays but no sound and doesn't rewind or fast forward. I think it just needs a proper service. Would I be able to send it to you? I can hear sound on the line out but not the headphone jack.

Do you accept mail-in servicing on the WM-6DC from Sydney, Australia? (Faulty CX20084 as well most likely!)...

Hi! Do you have sony cx20084 in stock? Thank you

Hello! I have a WM-F15 and it plays abit faster than usual, also playing a clicking sound while in use. Not sure if this is something to be worried about, I didn't notice the difference until I played it along with my phone. 1.15x speed roughly. Clicking does concern me most and might be the cause of speed? I'd appreciate any advice or if you think it needs to be looked at I'd also really appreciate that, thank you

Hi, I saw your posts and replies on the sony WM-D6C. I have one that plays fast and sounds like a chipmunk. I was wondering if you still do these repairs. I'm from New York, US and am willing to pay postage if it would be possible for you to look at it. Thank you! :)

Good Evening Deb64.

Having read alot of your posts, you are obviously the best person to ask about getting the speed issue on a Sony D6 resolved hopefully.

It has the typical problem of now running too fast. Would you be in a position to have a look at it with a view to repair if possible please.

I am not that far away, being in Hinckley.

Many Thanks

Lee

Hi there. I have a little used Sony WM-D6C (actually belongs to my wife) looks fab, but I did the stupid thing with an inappropriate power supply. Its clear you are an excellent source of advice but I wasn't sure whether you took on repairs and/or had access to old units that might cannibalised to make a fix possible?? Full story is in my introductory post! Kind regards

Good evening, i have a Sony WM-d6c that i broke by plugging in the wrong polarity. i have been using my backup cassette player since then and i am missing my Sony. If you are unable to help me could you suggest another technician? Thank you for your time.