It needs asking: are the tires round? I don't know how much deviation from perfectly-round is permitted but I'd guess "not much".
I pulled up pictures from my restoration of two of these. You have the tape path correct (acknowledging your motor pulley is absent in your...
Wow that's some Achilles' Heel! Or two.
I remember getting the album on LP!
I am presently auditioning a copy of This Is The Moody Blues. The J-card is old cardboard and dated 1974. I was as careful as I could be but the...
Good luck with this - more than luck required but a little always helps. And I just remembered a box with 4 HSJ202 machines collected years ago...
Another one of those things I never knew I wanted. Until now!
With you on tapes over vinyl - for me, it's the sheer effort of finding tapes these days that makes them all the more worthwhile.
I added the notes below to a post about a problem with DRM800A. DR-M30HX appears to have a similar mecha so this may be applicable: These decks...
These decks (DRM800, in my specific experience) seem to have a general weakness in that the *supply* spindle's axle can creep forward out of its...
I should have been clear about the construction of the cassette! Screwed ones, pretty easy; glued ones, often a matter of luck (or age) as to how...
You could replace a full Type 1 (including the spring) with a Type 2, *if* there is a good enough base area to glue the Type 2 pad to. It's very...
I will try to upgrade my search engine to a hope-driven one :nwink:
Thank you Mister X. That's exactly what I need. No search I've done has brought that up!
I'm aware of two basic types of pressure pad in cassette tapes. Type 1, I'll call it, is a thin pad mounted on a thin & springy piece of metal....
To be quite "crude" you could just use the sticky part of a Post-It note!
One good (and relatively low effort) avenue to explore early in the fixing process for just about any boombox is to "exercise" the control that...
Elementary question, but: is the belt fitted correctly?
Many of my recent boombox restorations have required removal and disassembly of these slide switches in order to clean and/or fix the internals....
Neat though it lacks those details that made mid-80s Walkmans so enticing?
Separate names with a comma.