Of course, that's what I wanted to suggest but forgot to do it. Post in the "Gear that you want section", that's the most likely place where you...
If the magnets are broken, forget about repairing it. However, given how rusty it looks it is possible that the rotor has rusted so much that...
There is no guide available yet. I'll explain how it's done in text. As for how complicated it is, you pretty much need to fully disassemble the...
Hi Dani and welcome to the forum ! The way you compose music looks very interesting to me, it seems unique (at least to me). Please explain in...
I'm not aware of such a spreadsheet existing, wanted to create one myself at some point. For the most part, rollers that are available you can...
If the FX70 is just an EX70 with radio, then this is the pinch roller that you need to buy:...
Yes, those coin cells are always used to keep power to a volatile memory, as those have very little current draw (in the order of a couple μA) so...
Let us know what you find. And do all the steps I indicated, especially the sanding of the spindle, flywheel thrust play and servo adjustment....
I guess it depends on how one defines "serious collector". If I were to judge by others' standards, I was never a serious collector and probably...
In many cases doing a repair properly implies a bit more than just putting a new belt in. Cleaning the pulley grooves for example, lubricating the...
Judging by the buttons, the mechanism is WM-150/WM-B603 type. Look at post #18 here:...
In regard to the tone control on the TPS-L2, as others have already mentioned it does have a tone control, but that is different from the EQ...
SONY WM-EX90/GX90 - complete re-lubrication of mechanism may be necessary; check if reels turn freely. - potential problem with clutch slider,...
@brunophilipe What wow&flutter figure do you get on WFGUI ? The play you mention in the shaft (up-down play) is something I have seen in some...
I would add that it depends if that belt is driving the capstan or not. D6, D6C, D5(M), DD9 all have belts but the capstan is disc drive (DD). In...
Yes, I do know this one, WM-2091 being in the same series as WM-150, WM-B603. This type of motor is the same as the one described in this thread...
If it's locked solid, it means the rotor is coming into contact with the coils. The coils assembly or PCB in the case of EX/FX type motor needs to...
I had the impression from the beginning that 3D printing is not an option: parts are not strong enough, nor precise enough in terms of dimensions....
1. There are 2 major downsides to the TPS-L2 in regard to sound: - wow&flutter is on the high side: do expect a value between 0.2% WRMS and 0.3%...
The fact that it sounded very very slow initially is a sign that there is a lot of load on the motor and it can't maintain the correct speed. Tape...
Separate names with a comma.