The tape selector and motor connectors do need to be removed indeed. Aside from that, there are 3 other connections that need desoldering: - there...
It depends on what your skills are. I would say it's not very difficult, but it does invlove some extra steps: - you need to remove the door; -...
Check the wires of the sled motor first. After cleaning and lubricating that middle gear, the laser should go back to the ToC position (near the...
Since you lubricated every rotating part, what else can be causing it ? If something is dragging, you will feel it by hand. Does that small idler...
I'm glad you found one that is working good and you paid a decent price on it. In regard to prices, it depends how patient you are. When you are...
I see. Then try to clean the grease on the part that goes into the reel, eventually roughen it with sandpaper so that the friction only occurs on...
It makes more sense now. First, I would double check those felt pads and try to clean them. It is possible that the glue that holds them oozed...
It's an interesting design... Given how the 2 clutches are designed, one thing is for sure: I would not expect the torque to be the same on both...
I don't think that will have any impact on the wow&flutter. I like to put it untwisted because it looks good and that's the way it should be. In...
The central pin rests on a piece of hard plastic (transparent) which you will be able to see from the other side. I think motor parts are...
Please attach a picture with back cover removed, to have an idea of how the belt path looks like. You won't find a belt specifically made for this...
I have never seen these before with music on them. I have only one of those small CDs (from the 90s), but it's not an audio one. Will share some...
SONY WM-701C/WM-F701C/WM-702/WM-F702/WM-703/WM-F707/WM-R707/WM-EX80/WM-EX85/WM-FX85/WM-508/WM-600/WM-805 - motor lubrication problems; if motor...
There are 5 or 6 (possibly more) slightly different motors across the EX/FX series, but all are built the same. The main difference is where the...
This thread covers how to remove the EU power limitation on SONY D-EJ250 Discman. Models sold in EU are limited to 1.5mW x 2, compared to the rest...
The EX/FX motor has magnets on both sides, but that is because the coils themselves are only PCB traces (lower number of turns), thus generating...
This thread will cover the disassembly and lubrication process of cages disc-type motors used in SONY walkmans. A short list of walkman using...
I already put the thread in the walkman repair tutorials. I will create another one with the WM-702 motor as well, as that's a bit different and...
I did edit the thread in regard to re-glueing. As of any motor of this type, yes I think re-glueing will be necessary. But I don't think it is a...
I did disassemble the motor on an EX walkman that I had handy. Created a thread about it:...
Separate names with a comma.