[ATTACH]
Sorry 4 resistors instead 5
I was try to measuring the component, is difficult because it is damaged. I put it up to another component to make me an idea. It's seems bigger...
In process to restaure the solder pads[ATTACH]
Mattb1970, I found that on Ebay:...
I'm not an expert, but it makes sense and explains very well the function of the diode and the insights of this part of the schematic!
Yes, it has continuity with the transistor, then the diode has 5 pins. I'm investing if the part suggested by Mattb1970 matching the available...
The other possibility is the component has 4 pins and there is a join t between two traces, in this case I think there would be these ones
It makes sense, base in the schematic, that the component has 5 pins, but now has only 4 pins, it could be the 5th pin dissappears when the heat...
At Silver965's pictures of the component, I can see two pins at the front side and one more at the back side, but the pic doesn't have the best...
The back side, it will be necessary to restore the traces, as they have been pulled of
But the component has, at this moment, 4 pins[ATTACH] [ATTACH] [ATTACH] [ATTACH]
It seems to have 5 pins[ATTACH]
Many thanks guys! Now I'm a bit confusing, I don't know if the component has 4 or 5 pins, this is the aspect of the pcb[ATTACH]
Many thanks! Very clarify the photos, the component can be see in their real shape. Unfortunately in this case there are differences between...
I think I get the issue, a broken component in the secondary pcb. By desoldering one cap I have access to review the suspected component. It seems...
The led on the secondary pcb turn on when the battery is connected and the tape is tensioned. I think there will be a discontinuity at some point,...
The microswitch has 4 pins, it seems 2 pins have allways continuity and the other 2 yes or no depending the position of the microswitch
I 've desoldered the cap located in front of the microswitch pins in order to be able to test the continuit directlty with the pin 2 of the ic5,...
The same measure no matter the switch position [ATTACH] [ATTACH] [ATTACH]
Separate names with a comma.
