Hi, thanks for helping out. I have tested solenoid with 1.5v battery and it is working. I misinterpreted that the solenoid wasn't working which in...
Hi, i am going to update about new issue that happens recently on this EX1 player. Right now the player refuses to trigger into norm/rew mode. I...
Sorry for unclear explanation, It is more like the Mechanism is unable to latch into reverse position and is only able to be in normal position...
Things I've done: [ATTACH] I have done the clutch spring retainer repair according to the instructions. Also checked when placing the assembly...
Thank you for this valuable information. 1. I was messing with the trimpot because there was no sound. I have set them back to original position....
I just got this Aiwa PX303 a couple of weeks ago. [ATTACH] Things I have done : PCB section: -Replace capacitors with the same uF value. 100uF @...
Thanks for more knowledge about these methods you mentioned. I will probably try them out again and maybe have one of my donor machines be...
Bit of an update 1 year after the successful repair on machine. I think I have found out why the AMS scan didn't work in my case. I went and...
Thanks so much everyone for helping me upon this matter. I have finally roughened the capstan shaft with ferric chloride and the results are...
Update on the progress. (problem found!) I have found the problem now that i have a donor machine. I decided to swap over the capstan wheels from...
Hi again, I have checked the mechanism again and wanted to know if it is normal for this wheel to have a notch to it? because i have noticed that...
Leaving an update here. (Also encountered new problems) I have finally got time to start working on my ex1 and it seems that i have encounter a...
I like EX1 because of the portability and the door mechanism which made it easy to change cassette. Also, the video you sent seems to be what im...
Hi, I have replaced my belt and pinch rollers from fixyouraudio and my WM-EX1 has been functioning well. But, after 6 months it seems that the...
Hi, I'm joining this forum to achieve the goal of fixing my WM-EX1 and gaining knowledge along the way. [ATTACH]
Separate names with a comma.
