Pre-recorded tapes encoded with Dolby C I think there are very few out there. And I wouldn't trust that they haven't degraded and will likely need...
The idea itself is nice, but there are some tell-tale signs it probably won't be manufactured (at least not at a reasonable cost): - given the...
Given the common problem with D-50s having burnt DC-DC converters I decided to do a mod on the power supply of my unit. As with the AC930A...
You need to bend the center gear arm as indicated in the tutorial until the gear slips no more. Alternatively, you can add a very small piece of...
Very good advice with the REW, EQ and Dolby buttons. Pressing the REW button is more important during disassembly as that's the point where it's...
About the latch, I have seen DD units on which the latch was a bit worn (both the pastic part and the hook on the door). If the latch has any...
The capacitor can be smaller if it has the same voltage rating or a voltage rating that's higher than the operating voltage. Bigger is an issue...
Yes, it is installed correctly. The spring I'm not sure you will find one that thin on ebay, it's a very fine wire diameter one. I don't know its...
The 550euros you paid I think is a decent price indeed ! As for units that are "fully working" and "sell" at a certain price regardless of...
Separately you're pretty much out of luck. While not impossible, it's more likely to find a spare board than such a switch. You will need either...
Separate names with a comma.
