This is the actual result ... Knobs absent at the beginning of this tred I borrowed from another model I have ... Listening to music is a...
Thanks ... I will probably post on another Aiwa model
ok ... have you checked if pin 23 or 2 is grounded? as in the diagram ... or there is a capacitor on the output or input of the preamp pin 19 and...
Ok last photos before closing the lid ... The music box-style cassette door release mechanism has replaced the lanyard .... redone the hook for...
I found the sony DSC-W830 on ebay that I use to post all the photos Sony dsc-w830 Compact Camera 20,1 MP CCD 5152 x 3864 pixels Silver | eBay
Well now I can show you how I fixed the speakers ... With water and vinyl glue .... or how I used the transformer of the Pioneer CT-1180W ... Or...
many memories.....
Hi Matt Follow the reasoning if the signal enters on pin 22 and comes out of the preamplified 19, the only connection between output (Pin 19) and...
I start to scrape the surface where to apply the glue inside I personally used a mini drill but it can also be done with glass paper ... I used...
I do some tests with the cassette ... mechanically and perfect all the functions are fine including the hitchhiking at the end of the stroke ... I...
The last switch is that of the break ... Now the problems begin ... I clean the mechanics from the old lubricating grease and reassemble ... but I...
Thanks guys .... Radio Raheem I don't have many boomboxes in all 4 Aiwa of which 3 are under restoration and I hope to publish again ... Jorge...
nice to see them all together
After cleaning and a small fold on the contact strips I put it back together and it seems to work by measuring the resistance variation ... I...
Thanks Mister x I had not yet seen this tred
In the meantime LM1111C arrives, I replace the 7808 regulator with a 7809 to have the 9 volts as shown in the diagram ... and I manage to mount it...
Finally I can try to hear the radio I connect two wires to the power supply (Red and Black) and I find the connection points on the main board...
..I look and regard the main board and I don't see anything burnt, on fire, unsoldered components or burnt, cut, broken tracks ... I don't find...
I understand that to a battery installed inside I connect my phone via bluetoot and try a little to hear how it sounds .... the music starts, the...
This is the story of course I did the work in my spare time I took about 3 months to get it back in perfect shape and functionality .. here is the...
Separate names with a comma.
