Then I add this .... J.M.J. Equinoxe .. [ATTACH] [ATTACH]
And arriving with a Delorean ...:biggrin:. I wish it were possible ... I would gladly return to that year to enter the contest :biggrin::biggrin:...
:biggrin::biggrin: Mister x.... Win hundreds of portable stereos with Baby shampoo johnsons. Look for the differences ..... between the two photos...
:thumbsup:Ok
[ATTACH] [ATTACH] So thanks for the schematic ... check if you have this 15 Volt power supply ... which feeds the audio chip and the display chip ...
to test you could put it next to the original led ... and connect it with small wires .... of course you have to keep the original led disconnected
Hi looking only this part of the schematic ... if you put the switch S101B on the radio it has power only the part of the motor controller ......
Ok .. Looking at the diagram posted previously .. ..we do not see it but the led is always on when it is in PLAY ... it behaves like any led ......
Ok now try with a tv remote control ... point it at the phone cam to check if you actually see, when you press a button, the infrared LED flashes...
Hi I still do not understand if the infrared diode or the receiver transistor is not working ... you can see the emitting diode with the phone...
Yes in the recording phase ic303 sends audio to the head .. The output pins of ic303 are number 1 L channel and 7 R channel ... Since you have a...
[ATTACH] [ATTACH] Hello ... this relay grounded the recording output during listening ... during recording it grounded the audio preamplifier...
Great TooCool Collection ... But I was wrong you were talking about Nile Rodgers[ATTACH]
Thanks for the manual
Hi ... I downloaded the schematic ... and observing it I realized that it uses a relay to make the exchange from listen to record ..... Have you...
Even if I arrive late ... you already have this information ... I placed this photo for further clarity ... Pay attention to the position of the...
Hi ... Sometimes I solved it like this ... With a needle punch a hole in a plastic bottle, enlarge the hole to your liking ... then cut out the...
this is a gear change done to a Wm-20 some time ago ... it should be similar to yours ... how to disassemble it reassemble a new one ... hope it...
I know the NEC brand for electronic components mounted on many brands such as Sony .. Pioneer etc. Personally I had this Nec Boombox bought in...
the photo did not come out very well but I think you understand ... the disc is not the original of many years ago but a recently reissue[ATTACH]...
Separate names with a comma.
