AKAI PM-01/Infinity Intimate Stereo/Cybernet MiniConcert(IntiMate)/KLH Solo - capacitor leakeage problem; I only repaired the Infinity in the...
JVC CQ-(F)7K/CQ-(F)5K, CQ-R7K, CQ-V9 - capacitor leakeage problem; note the PCB on this one is a giant flex one glued onto an aluminium...
JVC CQ-1K/CQ-F2 - capacitor leakeage problem (uses CE brand caps); - potentially damaged carbon printed resistors (can be replaced with normal...
SONY TCD-D3/TCD-D7/TCD-D8 - very complex unit with a lot of common problems; even ones that are sold as working will fail for sure in the near...
SONY TPS-L2/WM-3 - the battery cover latch is often missing and requires replacement with a 3D printed part available on ebay; - rubber set...
SONY WM-7 - a very complex unit which most of the time is sold as non-working; Just because it's a SONY and it's more high end, does not mean it...
SONY D6/D6C - common problem with servo IC burnt (CX20084), causing the motor speed to be too high and/or motor running all the time, even when...
SONY WM-2/WM-5 - contrary to what I have stated in other threads (will edit them), both of these units have a normal center gear, identical to...
SONY DD series (WM-DD, WM-DDII, WM-DDIII, WM-DC2, WM-D3, WM-DD100, WM-DD30, WM-DD33) - all units will have a broken center gear; if it has not...
WM-EX3, WM-EX5, WM-EX7, WM-EX9, WM-EX900, WM-EX910, WM-EX2000, WM-EX505, WM-EX527, WM-EX550/552, WM-EX560/EX562, WM-EX570, WM-EX610, WM-EX615,...
AIWA...
AIWA HS-P303/Kenwood CP-D3 - capacitor leakeage, need a complete re-capping. Not the easiest one to do, as the caps are very close to each other,...
This thread is intended to be a list of common problems found on walkmans and portable recorders in order to help buyers make a better decision...
@Lordusher What you say about fast forwarding and then it would no longer play is caused by sticky auto-stop levers. Refer to my thread "DD...
Very relevant details and pictures ! Keeping the door opened is indeed important, but to me it seems even more important to have a feel for it and...
I would do another check before drawing that conclusion: desolder one of the wires and measure out of circuit. Make sure the short does not come...
@Lordusher , @Mr.Swift : how did you proceed in removing that slider ? I ask because have seen this problem happening many times in the past year...
I made a measurement on a DD2 unit, the FG coil measures 702 ohms in circuit. You clearly have a problem, maybe the wires isolation has been...
Try removing this split washer (it looks like one, although the picture is grainy) and see if the table reel slides out. It shouldn't require...
Glad you made it work ! Please share some pictures, for reference. Is the PCB single sided or double sided ? On double sided PCBs, vias can also...
Separate names with a comma.
